T2 Track #T2-6ft
The T2 track is an ultra low profile track for lightweight artwork and graphics. A perfect track for mounting in retail store front windows for suspending graphics or in a home for lightweight art and photos. The T2 track is approximately 1/2" by 3/8" and available in 71" lengths and can support a maximum of 20 LBS per track. Use with T1F1 and T1F2 track fittings.
T1F1-18-Specify Length in Feet
The T1F1 cable fittings will attach to the track at any point to allow adding a piece between two existing pieces. Maximum weight per cable is 10LBS on the T2 track.
T1F2-15-Specify Length in Feet
The T1F2 cable fitting must slide in from the end of track and is a simple way to add some additional security to the system by preventing the cable from detaching at a midpoint on the track. Maximum weight per cable is 10LBS.
Cable Grippers for Hanging Art
Halsey Display cable grippers
allow for easy height adjustments on the suspension cable. The grippers
slide up and down the cable and self lock onto the cable where they are
left. Push the release pin at the top of the gripper to re-adjust. See
the most common grippers for hanging art here.